Wushu Judgment Regulation Exercitation
System installation wizard
下面结合图例，具体讲解一下如何安装武术项目裁判规则学习系统。
Now combine the diagram example,
this wizard will guide you through the Wushu Judgment Regulation Exercitation
System installation procedure.
第一步：运行安装向导
Step 1:
Run the installation wizard.
运行光盘的Setup.exe应用程序，可进入安装向导的第一步，选择安装语言选项，根据你当前的系统选择相应的语言，按确定下一步。(如图p-1)
Run the Setup.exe application of CD-ROM, you
can enter the first step of the installation. Please choose the language,
according to the installation language you chose, press “OK”. (P-1)
(图p-1)
第二步：选择安装项
Step 2:
Select installation item.
显示安装信息，按下一步继续。(如图p-2)
When show the wizard information
of installation, you should please press “NEXT” to continue. (P-2)
第三步：选择系统安装路径
Step 3: Select destination
location.
系统的默认安装路径是windows安装盘下的\Program File\JustTool\TaoluTrain 目录。若想更改目录可根据安装提示选择或创建你想安装的目录，建议系统安装在默认目录下，以方便查找。(如图p-3)
Setup will install system in C:\Program
Files\JustTool\Taolutrain folder under the Windows
install disk. If you want to install to a different folder, select the optional
components you wish to install in. (P-3)
第四步：复核安装信息
Step 4: Check the installation
information.
选择安装组件后会出现“开始复制”界面，复核正确后就点击——下一步，系统开始复制文件。(图p-4)
After select the installation
package you will see a “begin to copy” interface. Please press “NEXT” when you
define to check and the system begin to copy files. (P-4)
第五步：安装完成
Step 5: The installment completes
当安装向导完成文件的复制和系统的注册后，提示安装完成。(如图p-5)
After installs the guide to complete the document the duplication and the
system registration, The prompt installment completes.
(P-5)
(图p-5)
2
武术项目裁判规则学习系统功能说明
Wushu Judgment Regulation Exercitation System
function direction.
操作：在Windows桌面运行——Wushu Judgment Regulation Exercitation System快捷方式。(如图p-6)
Operate: Run the speed way of
Wushu Judgment Regulation Exercitation System under Windows. (P-6)
(图p-6)
2.1 系统参数设置
Set up parameter of system.
设置程序运行所需的各项参数值。一般按系统默认值设置即可，不用重新设置。(如图p-7)
Set up the parameter of system one
by one. General, you can set up it according to the tacitly approve of system.
(P-7)
操作：点击——参数设置，(主界面上圆点按钮)完成设置后点击——保存，最后选择——退出。
Operate: Press “SET UP PARAMETER”,
after you finish the installation, press “PRESERVE”, at last press “GO OUT”.
无声暂停时间：在“学习”中，弹出编码框的时间。如果有录入声音，则按照声音的时间。如果没有录入声音，则按此时间。
Pause time without voice: In “Study”,
the time of open. If have already recorded into the voice, then according to
voice of time.If did not record into the voice, then
press this time
评分反应时间：在测验或考试中，标准答案打点的时间和你打点的时间差在评分反应时间内,才可以被系统确认为正确的点。
Score response time: In test or
examine, Respond time at this time inside just can be confirm.
重播时间：当有打点的时候，按重播，从打点的时间退后的秒数。
Replay time: While beating the
point, press reruns, the Second that stay back.
登录帐户管理：可以对用户进行新增，删除和更改密码的操作。
Login user management: Can carry
on add to the customer, delete and change the password.
Manual Select Language：选择语言。
Manual Select Language：Choose the language
在线注册服务器地址：显示注册的网址。
Register server address: Show the
registered Web address.
通讯超时：和服务器连接，如果超过该时间，则停止通讯。
Communication timeout: Connect the
server, if exceed that time, then stop the communication.
(图p-7)
2.2
应用程序
Application
在主界面中点击——进入程序，(三角型图标按钮)。
Under the major interface, press “ENTER
PROGRAM”. (The triangle push-button)
2.3 软件注册
Software register
第一次进入系统需进行软件使用的注册。注册分为“在线注册” 和“离线注册”。(如图p-8)
When you enter the system at first
time, you must register the software. The registering includes “Online
Register” and “Offline
Register”.
在线注册：当前运行的计算机必需连接Internet，然后在厂商授权号处填上本公司提供的软件序列号，按确定，就会向服务器申请注册信息。在序列号无误的情况下注册成功。(如图p-8)
Online
Register: At first,
you must link your computer to Internet. Then, fill the software sequence
number in forms which our company supplied to you. At last, press “OK”, you are
completing register unless your sequence number in wrong. (P-8)
离线注册：在厂商授权号处填上提供的软件序列号，系统会产生一个网络号码，记录下来。再通过另外一台可以连接Internet的计算机，到光盘提供的网址获取激活码。或者可以通过电话的形式咨询激活码。 (如图p-9)
Offline
Register: At first,
fill the software sequence number in forms. Then, the system will produce a ” Networking Number”, write down it. Either you can gain a
registering code utilize another computer which can link to Internet, or seek
counsel of a registering code use telephone.
(图p-8)
(图p-9)
2.4 教材光盘的注册
Register teaching material
software.
第一次打开教材光盘上的教材文件时也需进行教材的注册。注册分为“在线注册” 和“离线注册”。注册方法和软件注册的方法是一样的，这里不再补充说明。
When you open the teaching material files in the teaching material software at first time, you must register too. The register includes “online register” and “Offline register”. The way is same to register software. (P-10)
(图p-10)
接下来的是学习系统的最常用部分，它是一个向导的形式，包括学习、训练和专家使用的制作模块。
Meets down is
studies the system the most commonly used part, It is
a guide's form, Manu facture module which including the study, the training and
the expert use.
按键说明：
Pressed key
explanation
：退出学习系统。
Withdrawal study system
：执行下一步操作，以下简称 下一步。
Execution next
step of operation, Hereafter refers to as next step
：执行返回操作。以下简称 上一步。
The execution
returns to the operation. Hereafter refers to as step
2.5 用户登录
The User Login
根据你使用的用户名和密码进行登陆，（默认的用户名是admin,密码是123）填写后按—下一步。(如图p-11)
The user name and the password uses which
according to you carry on login,(Tacitly approves the
user name is admin, After the password is 123) fills in according to next step. (P-11)
(图p-11)
2.6 选择学习方向
Choice study direction
成功登录后，你将进行学习方向的选择。分为 “学习”和“测验/考试”。(如图p-12)
鼠标单击学习或测验/考试，选取内容，然后按—下一步。
After the success registers, you
will carry on the study direction the choice. It divides into "the study"
and "the examination/Test ". (Like attempts p-12) the mouse to
single-click the study or the examination/Test, Selection content, Then
according to next step .
(图p-12)
2.7 打开教材文件
Open the teaching material document
如图p-13，单击按钮--
，出现图p-14，打开光盘或磁盘上的教学文件，选择后按“打开”，然后按--下一步。
Like attempts p-13, Single-clicks the button -- , Appears attempts
p-14,Turns in the compact disc or the floppy disk teaching document, After the
choice presses "opens", Then according to -- next step .
（图p-13）
（图p-14）
2.8 选择组别
Choose Group
如图p-15，选择A，B1，B2，C组别的教学，单击其中一个组别后按—下一步，开始进行训练。
Like attempts p-15,Chooses A,B1,B2,C group of
other teaching, Single-clicks group since parting according to the next step, Starts to
carry on the training.
注：黑色圆点的是没有内容，不能选择的。
Note: The black dot is does not have the content, Cannot
choose.
（图p-15）
2.9 播放导航条
Broadcast navigation bar
训练时，配合教材文件的播放需用到播放导航条来控制播放（如图p-16）。
When training, the coordinate teaching material
document broadcast needs to the broadcast navigation bar controls the broadcast.
操作：在
上面按鼠标左键，是返回到向导界面，重新选择各项内容。
Operation: Press, will return
the guide interface, Re- choose content.
（图p-16）
编码框：（图p-16a）
Code bar:
编码：显示当前动作的编码。
Code: Show the code that is playing.
说明：显示该编码的说明。
Explained: Demonstrates this code the explanation.
（图p-16a）
如果是C组的教学，则右下角出现难度动作编码。（p-16b）
If is C group
of teaching, Then the right under angle appears the difficulty movement code. （p-16b）
（图p-16b）
中间的数字表示，这是第几个编码，红色表示确认这个动作，黑色表示不确认这个动作。
Among digital presentation, This is the several
code, The red expression confirms this movement, The black expressed does not
confirm this movement
（图p-16c）
（图p-16c）箭头指示的黑点，表示该处有一个编码。
（图p
2.10 测验、考试的使用
Examination, test use
此模块包括测验和考试两个内容。（图p-17）
This
module includes two content, test and examination.
测验操作：开始播放教学视频后，发现一个时刻的扣分点，用回车键（ENTER）或USB打点器 确认此时刻的扣分内容，在输入框上选择或输入扣分编码（图p-18），系统会立即有提示信息（图p-19）。视频结束后，系统会给出今次的打分评估。（图p-20）
Test Operation: After broadcast a teaching visual, you can find a deduct fraction in moment, use “ENTER” or Pressbutton for Judge of USB to confirm the deduct fraction content for this moment, select or fill deduct fraction coding in the input frame. (P-18) The system will point out information immediately. (P-19) After close the visual, the system will give an estimate for this competition.
考试操作：（模拟现场打分操作）
Examination operation: (Simulate on-the-spot grade operate.)
A组操作：开始播放教学视频后，发现一个时刻的扣分点，用回车键（ENTER）或USB打点器先确认此时刻的扣分点，最后视频结束才一次性输入扣分编码，同时，系统会给出今次的打分评估。
Group A: After broadcast a teaching visual, you can find a deduct fraction in moment, At first, use “ENTER” or Pressbutton for Judge of USB to confirm the deduct fraction content for this moment, then fill deduct fraction coding after close the visual, at last, the system will give a estimate for this competition.
C组操作：开始播放教学视频后，发现一个时刻的扣分点，用回车键（ENTER）或USB打点器的红色按键确认YES，用空格键或USB打点器的黑色按键确认NO，视频结束，系统会给出今次的打分评估。
Group C: After broadcast a
teaching visual, you can find a deduct fraction in moment, use “ENTER” or the
red key of Pressbutton for Judge of USB to define “YES”;
Use “SPACE BAR” or the black key of Pressbutton for
Judge of USB to define “NO”. After close the visual, the system will give a estimate for this competition.
（图p-17）
（图p-18）
（图p-19）
（图p-20）